No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Home
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
Model C Es gibt 60 Artikel.
-
225,00 €
-
140,00 €
Damper Fan Cover Assembly—Model C
This is the damper-side cover for the Model C Indoor Rower. Does not include the damper fan cover screws (order separately, part number 1231). See more info.
140,00 € -
85,00 €
Chain Axle Sprocket Replacement Kit Model...
For use with Model C Indoor Rowers. Replaces the original Model C parts with smoother, quieter Model D parts. This kit includes 14 tooth quiet sprocket, axle, chain idler pulleys, nickel chain with connectors and swivel, 17mm bearing, 17mm bearing cup, R8 bearing, R8 bearing cup, screws and nuts. See more info.
85,00 € -
72,00 €
Seat Complete Top, Frame & Rollers—Model...
For use on all Model C, D and E Indoor Rowers. Includes seat top, seat frame, seat rollers and hardware. See more info.
72,00 € -
42,50 €
Nickel Chain with Connectors
For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.
42,50 € -
38,00 €
Right Foot Bracket
For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
38,00 € -
38,00 €
Left Foot Bracket
For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
38,00 € -
31,50 €
Monorail Hanger
This is the metal part on the front top and front bottom of the monorail that makes contact with the hangar bolt tube on the front half of the indoor rower. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.
31,50 € -
28,00 €
Seat Top with Frame and Screws Gray—Model...
For use on all Model C, D and E Indoor Rowers. Includes seat top, seat frame, and hardware. See more info.
28,00 € -
27,00 €
Track/Tape Assembly with Rivets—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.
27,00 € -
25,00 €
Monitor Pickup and Screw Kit—Model A, C
For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...
25,00 € -
23,00 €
Handle Retrofit Kit—Model B,C
For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and Dynamic Indoor Rowers to your Model B or C. Handle is 19" long with overmolded grips and features an ergonomic 10-degree bend that better simulates arm position of on water rowing and provides a more comfortable position...
23,00 € -
22,00 €
Frame Lock and Hardware
For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.
22,00 € -
21,00 €
Indoor Rower Handle with Grips
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
21,00 € -
19,50 €
Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
19,50 € -
17,50 €
COG NUT TOOL WITH CLUTCH
Cog nut tool with clutch. Not compatible with the Model B Indoor Rower.
17,50 € -
16,00 €
-
13,50 €
Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
13,50 € -
9,00 €
Damper Replacement Kit
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
9,00 € -
8,50 €
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
8,50 € -
7,50 €
14 Tooth Quiet Sprocket—Model D and E
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.
7,50 € -
7,50 €
Flexfoot, Gray
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color (for black, order part number 1017 instead). This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot...
7,50 € -
7,00 €
Chain Oil
This is a 3-ounce bottle of 3-IN-ONE® Multi-Purpose Oil. Recommended for lubricating the chains on Concept2 Indoor Rowers.
7,00 € -
6,00 €
Monitor Arm, Black
This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.
6,00 € -
5,50 €
Travelling Pulley Assembly
For use with the Model C, D and E Indoor Rowers. This is the 2" x 2" x 3/4" metal traveling pulley assembly with a chain idler pulley included. The chain and shock cord come together at the traveling pulley, and the traveling pulley moves back and forth inside the indoor rower on every stroke. One per machine. See more info.
5,50 €
