- Deutsch
- English
No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Parts There are 92 products.
Subcategories
-
Model B
Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.
-
Model C
Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
-
Model D, Original
Parts listed here are compatible with Model Ds manufactured from July 14, 2003 to July 21, 2006 (serial numbers 071403 to 072106
-
Model D, Updated
Parts listed here are compatible with Model D Indoor Rowers manufactured from July 31, 2006–present (serial numbers 073106–present).
-
Model E
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
-
Dynamic
Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
-
3,30 €
Footstrap
For use with Model A, B, C and original D Indoor Rowers. Replacement nylon footstrap with buckle, approximately 24" long by 1" wide with a screwhole drilled approximately 7" from the buckle end. Two per machine. Sold individually.
3,30 € -
3,20 €
-
3,10 €
Shock Cord Pulley
For use with Model C, D and E Indoor Rowers. This is a 3-3/8 inch diameter pulley that the shock cord (part number 1731) runs over inside the Concept2 Indoor Rower. There are four per machine. Sold individually. See more info.
3,10 € -
2,90 €
Wind Shield
For the Dynamic Indoor Rower only. The clear plastic Wind Shield is designed to deflect air coming from the flywheel away from the rower´s body.
2,90 € -
2,90 €
-
2,70 €
End Cap—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the end cap for the front of the indoor rower. See more info.
2,70 € -
2,70 €
Chain Idler Pulley
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.
2,70 € -
2,20 €
R8 Bearing—Model B, C, D, E, Dynamic
For use on all Model B, C, D, E and Dynamic Indoor Rowers. This is the R8 bearing located outside of the flywheel. The corresponding bearing cup (part number 1013 or 258 depending on which model you have) is sold separately. See more info.
2,20 € -
2,20 €
Wooden Handle Grip—Model A, B, C
For use on the wooden handle originally sold on the Model A, B and C Indoor Rower. These are the black foam grips that fit on either end of the handle. Two per handle. Sold individually. Order two to have a pair. See more info.
2,20 € -
2,00 €
Upper Hanger—Updated Model D, E
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
2,00 € -
1,80 €
-
1,70 €
NUT 3/8-16 ACORN ZINC C/D
This is the acorn nut found on the top of the front bumper of the monorail. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.
1,70 € -
1,60 €
Rear Bumper—Model C, D, E
For use on the Model C, D and E Indoor Rower. This is the bumper for the rear of the monorail. See more info.
1,60 € -
1,40 €
Handle Hook
For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach. Includes hardware.
1,40 € -
1,40 €
-
1,30 €
Compression Member
For use with Model D Indoor Rowers manufactured from November 2006–present and Model E Indoor Rowers. See more info.
1,30 € -
1,14 €
-
1,10 €
Bottom Front Bumper
This is part of the front monorail assembly. It is made of black plastic. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006.
1,10 € -
1,10 €
-
0,95 €
Bolt, 3/8-16 x 4-1/2
This is the bolt for the top seat roller for all Model C, D, E and Dynamic Indoor Rowers. Order two per machine. See more info.
0,95 € -
0,95 €
Seat Roller Bolt—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This is part of the seat roller hardware.
0,95 € -
0,90 €
Bearing Cover
For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.
0,90 € -
0,80 €
Screw, 6-lobe, 1/4-20 x 3/4
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014. See more info.
0,80 € -
0,80 €
Screw, 6-lobe, 1/4-20 x 5/8, epoxy
Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.
0,80 € -
0,76 €
Seat Spacer—Model A, B
For use with the Model A and B Indoor Rower (Ergometer) only. This spacer is part of the seat roller hardware.
0,76 €
