- Deutsch
- English
No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
RowErgs There are 89 products.
Subcategories
-
31,50 €
Fan Cover Assembly Black—Updated Model D
This is the damper-side cover for the black Model D Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276). See more info.
31,50 € -
31,50 €
Monorail Hanger
This is the metal part on the front top and front bottom of the monorail that makes contact with the hangar bolt tube on the front half of the indoor rower. For use on all Model C Indoor Rowers and on Model D Indoor Rowers manufactured from July 2003–2006. Order two per machine. See more info.
31,50 € -
31,50 €
Fan Cover Assembly Gray—Gray Model D and E
This is the damper-side cover for the gray Model D and Model E Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276). See more info.
31,50 € -
31,50 €
Fan Cover Assembly Lt Blue—Light Blue Model D
This is the damper-side cover for the light blue Model D Indoor Rower. Does not include the four damper fan cover screws (order separately, part number 1276). See more info.
31,50 € -
28,50 €
Power Generator Assembly
For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info.
28,50 € -
27,00 €
Sensor Coil
For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.
27,00 € -
27,00 €
Track/Tape Assembly with Rivets—Model C, D, E
For use on all Model C, D and E Indoor Rowers. This is the stainless steel track for all rowers manufactured after January 1994. It measures 48 inches long and includes double-sided tape and two rivets for installation. See more info.
27,00 € -
25,00 €
Monitor Pickup and Screw Kit—Model A, C
For use with Model A and C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need...
25,00 € -
23,00 €
Handle Retrofit Kit—Model B,C
For use with Model B and C Indoor Rowers. This kit allows you to retrofit the handle that comes standard on the Model D, E and Dynamic Indoor Rowers to your Model B or C. See more info.
23,00 € -
23,00 €
Indoor Rower Heart Rate Receiver for Polar...
If you already own a Polar™ or Polar compatible heart rate chest belt transmitter and would like to enable the PM2/PM2+/PM3/PM4 heart rate monitoring function on your Concept2 Model A, B, C, D, or E Indoor Rower, this Concept2 Heart Rate Receiver is what you need.
23,00 € -
22,00 €
Frame Lock and Hardware
For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.
22,00 € -
21,00 €
Indoor Rower Handle with Grips
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
21,00 € -
19,50 €
Flywheel Back Cover—Black Model D
For use on all black Model D Indoor Rowers manufactured after July 2006. See more info.
19,50 € -
19,50 €
Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
19,50 € -
19,50 €
Flywheel Back Cover—Light Blue Model D
For use on all light blue Model D Indoor Rowers manufactured from July 2003–July 2012. See more info.
19,50 € -
19,00 €
Deluxe Seat Pad
Let’s face it: the backside works hard during rowing. If you prefer a bit more padding, try our seat pad. Made from 12mm textured rubber, this provides the comfiest row around with cut out sections in the middle for the pelvis and at the rear to accommodate the coccyx. The seat pad can be easily transferred between machines.
19,00 € -
16,50 €
Slide Shock Cord Fix Kit
For use with Concept2 Slides. Includes two elastic replacement shock cords and hardware necessary to anchor them to the Slide. Order one per Slide. See more info.
16,50 € -
16,00 €
-
13,50 €
Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
13,50 € -
9,50 €
-
9,00 €
Damper Replacement Kit
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
9,00 € -
8,50 €
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
8,50 € -
7,50 €
14 Tooth Quiet Sprocket—Model D and E
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should replace the chain at the same time (see part number 1916). See more info.
7,50 € -
7,00 €
-
6,00 €
Monitor Arm, Black
This is the part of the indoor rower that connects to the Performance Monitor on one end and the chain guide brackets on the other. For use on all Model C and Model D Indoor Rowers. See more info.
6,00 €
