Geen producten
Prijzen zijn incl. btw
Het product is succesvol aan uw winkelwagen toegevoegd
Er zijn 0 artikelen in uw winkelwagen. Er is 1 artikel in uw winkelwagen.
Model D, Origineel (D1) Es gibt 70 Artikel.
-
225,00 €
-
85,00 €
-
72,00 €
-
50,00 €
Nickel Chain with Sprocket Kit
For use with Model D and E Indoor Rowers. This item includes one 8' 4" long nickel plated chain with a brass swivel at the handle end and chain connector for the inside end. It also includes a 14 tooth sprocket (compatible with Model D and E Indoor Rowers only) for the flywheel axle. If you need to replace both the chain and sprocket, this is the part...
50,00 € -
49,00 €
Maintenance Kit—Original Model D
For use with original Model D Indoor Rowers only. Includes the most common wear and tear parts to keep your Model D in top condition. See more info.
49,00 € -
42,50 €
Nickel Chain with Connectors
For use with Model C, D and E Indoor Rowers. Includes on 8' 4" long chain with a brass swivel at the handle end and chain connector for the inside end. If your chain is badly rusted, has seized links or is broken, you will need to replace it with this part. See more info.
42,50 € -
31,50 €
-
31,50 €
-
28,50 €
Power Generator Assembly
For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info.
28,50 € -
28,00 €
-
27,00 €
-
27,00 €
-
22,00 €
-
22,00 €
Frame Lock and Hardware
For use with Model C and original Model D Indoor Rowers. This is the Framelock Kit for all Model C and original Model D Indoor Rowers. It includes the axle, the framelock, the framelock cord, two screws, two washers and a hexkey tool.
22,00 € -
21,00 €
Indoor Rower Handle with Grips
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
21,00 € -
19,50 €
-
19,50 €
Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
19,50 € -
17,50 €
-
16,00 €
-
13,50 €
Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
13,50 € -
8,50 €
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
8,50 € -
7,50 €
-
7,50 €
Flexfoot, Gray
For use with updated Model D, Model E and Dynamic Indoor Rowers. Also fits Model C and original Model D Indoor Rowers but is dark gray in color (for black, order part number 1017 instead). This flexfoot piece fits into the footstretcher covers (part numbers 1054 and 1055, sold separately) to make the complete footstretcher assembly. Footplate/Flexfoot...
7,50 € -
7,00 €
-
6,00 €
